| Technical Specifications | |
| Model | Capacity |
| DM – 20 | 15 to 20 TPH |
| DM – 45 | 30 to 45 TPH |
| DM – 60 | 45 to 60 TPH |
| DM – 90 | 60 to 90 TPH |
| DM – 120 | 90 to 120 TPH |
| DM – 150 | 120 to 150 TPH |
| Technical Specifications | |
| Model | Capacity |
| DM – 20 | 15 to 20 TPH |
| DM – 45 | 30 to 45 TPH |
| DM – 60 | 45 to 60 TPH |
| DM – 90 | 60 to 90 TPH |
| DM – 120 | 90 to 120 TPH |
| DM – 150 | 120 to 150 TPH |
Features:
Advantages:
The dryer is accurately fabricated to ensure proper heating of aggregates with minimum heat loss. It is supported on steel rollers through steel tyres with idlers and guide rollers and is provided with segmented driving sprocket.
It is of single chassis construction. At each Bin, a radial gate is provided which can be opened in any position to regulate the aggregate flow. Individual endless belts fitted with variable speed motors discharges material onto the gathering conveyor as per the mix design.
A fully automatic control panel with feather touch controls are provided for controlling the quantity and quality of production with operator sitting in air-conditioned comfort.
All systems are completely synchronised with automatic / manual control of burners, load cell, mix temperature, cold feed, mineral, bitumen proportions, etc. Manual control is possible through over-ride system. Adequate safety measures are adopted to avoid overloading, short-circuit, etc.
A single-deck vibratory screen is provided to remove oversize aggregates received from the four bin feeder.
An effective air pollution control system for minimizing emission of fine particles and gases.
The drying and mixing unit of the plant demands complex flight design. Specially designed flights lift and cascade the aggregate to reduce the final moisture content to 0.5% (by weight).
Fabricated from steel plates, it feeds the required quantity of mineral to the dryer drum.
A slinger conveyor is provided which receives aggregate from the four bin feeder and feeds it to the dryer drum.
Loadout conveyor fitted with hydraulically operated hopper is provided at the discharge end of the dryer drum which feeds the hot mix material into tippers.
A fully automatic, high pressure, auto jet burner is mounted at one end of the drum.
Fabricated from steel plates, it feeds the required quantity of mineral to the dryer drum.
Tank of 15/20 MT capacity is provided, fabricated from steel plates with 50 mm glasswool insulation, manhole, thermocouples, etc. Bitumen is pumped to the dryer drum through hot oil jacketed pipelines. Tanks are fitted with independent on-off type burners.
One Tank of 2500 / 5000 / 10000 Ltrs. capacity is provided with each plant.